Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
DESCRIPTION |
These are basically two phase motors. Two-phase supply is normally not available, hence to operate the motors from single phase AC supply, second phase is artificially created by inserting a Capacitor and Resistor combination in series with one of the motor phase windings. Suitable combination of Capacitor and Resistor assembly is supplied along with the motor. The speed of revolution is 60 RPM at 50Hz. Instant stop & reversibility are achieved by means of a single-pole, double throw switch with center OFF position. |
FEATURES | |
• |
Instant start & stop. |
• |
The motors have permanent magnet on the toothed rotor. The rotor is locked with matching teeth on stator, as soon as power is switched OFF. |
• | Starting & running current are same. |
• | Maximum Torque is 15 to 20% higher than nominal torque. |
ELECTRICAL SPECIFICATIONS | |||||
TYPE ? | SS-32 | SS-72 | SS-102 | SS-202 | SS-302 |
VOLTAGE | 240V.A.C. | 240V.A.C. | 240V.A.C. | 240V.A.C. | 240V.A.C. |
CURRENT | 100mA | 100mA | 200mA | 300mA | 500mA |
RESISTOR | 1kO / 15W | 1kO / 15W | 1.8kO / 20W | 800O / 100W | 235O / 200W |
CAPACITOR | 0.7mfd / 400V.A.C. |
0.7mfd / 400V.A.C. |
1.0mfd / 400V.A.C. |
3.0mfd / 400V.A.C. |
4.0mfd / 400V.A.C. |
NOM.TORQUE | 3kg cm | 7kg cm | 10kg cm | 20kg cm | 30kg cm |
MECHANICAL SPECIFICATIONS | |||||||||
DIMENSIONS ? TYPE ? |
A | B | C | D | E | F | G | ØH | WT. kg |
SS-32 / SS-72 | 87SQ. | 8 | 25 | 70 | 17 | 112 | 70SQ. | 7 | 1.3 |
SS-102 | 108SQ. | 9 | 25 | 75 | 12 | 112 | 85SQ. | 8 | 2.0 |
All dimensions are in mm. | |||||||||
DIMENSIONS ? TYPE ? |
A | B | C | D | E | F | G | ØH | WT. kg |
SS-202 | 108SQ. | 9 | 34 | 104 | 21 | 159 | 85SQ. | 8 | 3.4 |
SS-302 | 108SQ. | 9 | 34 | 132 | 21 | 187 | 85SQ. | 8 | 4.5 |
All dimensions are in mm. | |||||||||
ORDERING INFORMATION |
1) Type |
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.